R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

133
Default
The hello interval is 3 seconds.
Views
MPLS view
Default command level
2: System level
Parameters
timevalue: Hello interval in the range of 1 to 60 seconds.
Usage guidelines
Before configuring this command, enable the hello mechanism in MPLS view.
Examples
# Set the hello interval to 5 seconds.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] mpls rsvp-te timer hello 5
Related commands
• mpls rsvp-te hello
• mpls rsvp-te hello-lost
mpls rsvp-te timer refresh
Use mpls rsvp-te timer refresh to configure the path/reservation state refresh interval.
Use undo mpls rsvp-te timer refresh to restore the default.
Syntax
mpls rsvp-te timer refresh timevalue
undo mpls rsvp-te timer refresh
Default
The path/reservation state refresh interval is 30 seconds.
Views
MPLS view
Default command level
2: System level
Parameters
timevalue: Refresh interval in the range of 10 to 65535 seconds.
Examples
# Set the path/reservation state refresh interval to 60 seconds.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] mpls rsvp-te timer refresh 60