R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

191
Field Descri
p
tion
NOTE:
You can use VCCV to verify the connectivity of a VC only if the two peers support at least one identical CC type
and one identical CV type.
# Display information about Martini VCs received from the remote peer.
<Sysname> display mpls l2vc remote-info
total remote ldp vc : 1
Transport Group Peer Remote Remote C Remote
VC ID ID Addr Encap VC Label Bit MTU
100 0 3.3.3.9 ppp 1025 0 1500
Table 72 Command output
Field Descri
p
tion
total remote ldp vc Total number of remote LDP VCs.
Transport VC ID Remote VC ID.
Group ID Remote VC group ID, used for the L2VPN VC FEC TLV field of LDP messages.
Peer Addr IP address of the peer.
Remote Encap VC type of the remote end.
C Bit
Indicates whether the control word function is enabled or not. 0 means
disabled and 1 means enabled.
Remote MTU MTU of the remote interface.
display mpls l2vpn
Use display mpls l2vpn to display information about L2VPNs configured on a PE.
Syntax
display mpls l2vpn [ export-route-target-list | import-route-target-list | vpn-name vpn-name [ local-ce
| remote-ce ] ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
export-route-target-list: Displays the export route target list.
import-route-target-list: Displays the import route target list.
vpn-name vpn-name: Specifies an L2VPN by its name, a case-insensitive string of 1 to 31 characters that
cannot include hyphens (-).
local-ce: Displays the configurations and status of all local CEs in the specified L2VPN.
remote-ce: Displays the configurations and status of remote CEs learned from other PEs.