R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

201
Table 83 Command output
Field Descri
p
tion
Total PW Entry
Total number of VPWS PW entries, which is displayed only when you
display all VPWS PW entries.
In Interface Incoming interface, which is bound to L2VPN.
Service Instance ID Service instance ID.
In VC Label Incoming VC label of the data packets.
Out VC Label Outgoing VC label of the data packets.
Out Interface
Outgoing interface, valid for a local CCC connection. For other
connections, this field displays hyphens (----).
Encapsulation Type VC type.
MTU Maximum transmission unit.
Control Word Indicates whether control word is used.
Packets received Number of data packets received by the PW.
Receives discarded Number of data packets dropped in the inbound direction of the PW.
Packets sent Number of data packets sent by the PW.
Sends discarded Number of data packets dropped in the outbound direction of the PW.
Tunnel ID
Public tunnel ID and entry state of data packets. The entry state can be
Done or Waiting.
GRCount: Number of times that GR occurs.
SIG In VC Label Incoming VC label of the signaling packets.
SIG Out VC Label Outgoing VC label of the signaling packets.
Packets received Number of signaling packets received by the PW.
Receives discarded Number of incoming signaling packets dropped by the PW.
Packets sent Number of signaling packets sent by the PW.
Sends discarded Number of outgoing signaling packets dropped by the PW.
Tunnel ID
Public tunnel ID and entry state of signaling packets. The entry state can be
Done or Waiting.
GRCount: Number of times that GR occurs.
Backup PW Information about the backup PW.
display mpls static-l2vc
Use display mpls static-l2vc to display information about static virtual circuits (SVCs) created on the
device.
Syntax
display mpls static-l2vc [ interface interface-type interface-number [ service-instance instance-id ] ] [ |
{ begin | exclude | include } regular-expression ]