R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

203
***CE-interface : S2/1/0:0 is up
Service instance ID : --
CEM Class : satopexam
Jitter Buffer Size : 100 ms
Payload Size : 24 bytes
Idle Code : 0x99
VC State : up/up
Destination : 3.3.3.9
VC ID : 100/101
Transmit-vpn-label : 100/200
Receive-vpn-label : 300/400
Tunnel Policy : policy1
Tunnel Type : lsp
Tunnel ID : 0x226013
Backup VC
VC State : up/up
Destination : 3.3.4.9
VC ID : 200/201
Transmit-vpn-label : 500/600
Receive-vpn-label : 700/800
Tunnel Policy : policy1
Tunnel Type : lsp
Tunnel ID : 0x226013
Table 85 Command output
Field Descri
p
tion
CE-interface Interface connected to the CE.
CEM Class CEM class referenced by the interface.
Jitter Buffer Size Jitter buffer size, in milliseconds.
Payload Size Size of the payload of a packet, in bytes.
Idle Code Padding string to be used in case of packet loss.
VC State Data VC and signaling VC state: up, down, or blocked.
Destination Destination IP address of the VC.
VC ID VC IDs of the data VC and signaling VC.
Transmit-vpn-label
Outgoing label—Label used by the data VC and signaling VC to
send VPN packets.
Receive-vpn-label
Incoming label—Label used by the data VC and signaling VC to
receive VPN packets.
Tunnel Type Type of the tunnel: LSP, CR-LSP, or GRE.
display pw-class
Use display pw-class to display the PW class information.