R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

216
Reply from 100.1.2.1: bytes=100 Sequence=1 time = 62 ms
Reply from 100.1.2.1: bytes=100 Sequence=2 time = 62 ms
Reply from 100.1.2.1: bytes=100 Sequence=3 time = 62 ms
Reply from 100.1.2.1: bytes=100 Sequence=4 time = 62 ms
--- FEC: FEC 128 PSEUDOWIRE (NEW) 3.3.3.9 301 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 31/55/62 ms
pw-class
Use pw-class to create a PW class and enter PW class view.
Use undo pw-class to delete an existing PW class.
Syntax
pw-class class-name
undo pw-class class-name
Default
No PW class is created.
Views
System view
Default command level
2: System level
Parameters
class-name: Specifies a name for the PW class, a case-insensitive string of 1 to 19 characters.
Usage guidelines
To create multiple VCs with the same attributes (such as VC type and VC tunneling policy), you do not
need to configure the attributes one by one for each VC. Instead, you can create a PW class, configure
VC attributes in the PW class, and then reference the PW class in each VC.
Examples
# Create PW class pw100 and enter its view.
<Sysname> system-view
[Sysname] pw-class pw100
[Sysname-pw-pw100]
pw-tunnel-policy
Use pw-tunnel-policy to specify the tunneling policy for a PW class.
Use undo pw-tunnel-policy to restore the default.
Syntax
pw-tunnel-policy policy-name