R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

229
undo broadcast-restrain
Default
The broadcast suppression ratio for a VPLS instance is 5.
Views
VSI view
Default command level
2: System level
Parameters
ratio: Broadcast suppression ratio for the VPLS instance, in the range of 1 to 100, in percentage.
Usage guidelines
Together with the bandwidth command, this command defines a threshold for suppressing the broadcast
traffic (including broadcast, multicast, and unknown unicast traffic) of the VPLS instance. When the speed
of the broadcast traffic exceeds the product of the speed limit and this ratio, the extra broadcast traffic
will be dropped.
Examples
# Set the broadcast suppression ratio for VPLS instance aaa to 10.
<Sysname> system-view
[Sysname] vsi aaa
[Sysname-vsi-aaa] broadcast-restrain 10
description
Use description to set a description for a VPLS instance.
Use undo description to remove the configuration.
Syntax
description text
undo description
Default
No description is set for a VPLS instance.
Views
VSI view
Default command level
2: System level
Parameters
text: Description for a VPLS instance, a string of 1 to 80 characters.
Examples
# Set the description of VPLS instance aaa to Aaa_Technologies_Co._Ltd..
<Sysname> system-view
[Sysname] vsi aaa
[Sysname-vsi-aaa] description Aaa_Technologies_Co._Ltd.