R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

312
Parameters
vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31 characters.
Usage guidelines
Before configuring the mpls ldp vpn-instance command, you must configure the MPLS LSR ID and enable
MPLS for the device.
Examples
# Enable LDP for VPN instance vpn1, create the LDP instance, and enter the MPLS LDP VPN instance
view.
<Sysname> System-view
[Sysname] mpls ldp vpn-instance vpn1
[Sysname-mpls-ldp-vpn-instance-vpn1]
Related commands
• mpls
• mpls lsr-id
nesting-vpn
Use nesting-vpn to enable the nested VPN function.
Use undo nesting-vpn to disable the nested VPN function.
Syntax
nesting-vpn
undo nesting-vpn
Default
The nested VPN function is disabled.
Views
BGP-VPNv4 subaddress family view
Default command level
2: System level
Usage guidelines
If a nested VPN peer connected to a PE needs to advertise VPNv4 routes, you must enable nested VPN
on the PE.
Examples
# Enable nested VPN.
<Sysname> system-view
[Sysname] bgp 10
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] nesting-vpn