R3102-R3103-HP 6600/HSR6600 Routers MPLS Command Reference Guide

332
reflect between-clients (BGP-VPNv4 subaddress family
view/BGP-L2VPN address family view/BGP-VPLS address
family view)
Use reflect between-clients to enable route reflection between clients.
Use undo reflect between-clients to disable the function.
Syntax
reflect between-clients
undo reflect between-clients
Default
Route reflection between clients is enabled.
Views
BGP-VPNv4 subaddress family view, BGP-L2VPN address family view, BGP-VPLS address family view
Default command level
2: System level
Usage guidelines
If fully meshed interconnections exist between the clients, route reflection is not required. Otherwise, an
RR is required for routes to be reflected from one client to every other client.
Examples
# In BGP-VPNv4 subaddress family view, disable route reflection between clients.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] undo reflect between-clients
# In BGP-L2VPN address family view, disable route reflection between clients.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] l2vpn-family
[Sysname-bgp-af-l2vpn] undo reflect between-clients
# In BGP-VPLS address family view, disable route reflection between clients.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] vpls-family
[Sysname-bgp-af-vpls] undo reflect between-clients