Manualshelf

R3102-R3103-HP 6600/HSR6600 Routers MPLS Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP HSR6602-G Router
121122123124125126127128129130
120
Execute the display mpls lsp command on each router for LSP entries. You can see that two LSPs
are traversing Router B and Router C.
[RouterA] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC In/Out Label In/Out IF Vrf Name
4.4.4.4/32 NULL/1024 -/GE2/1/1
[RouterB] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC In/Out Label In/Out IF Vrf Name
4.4.4.4/32 1024/1024 GE2/1/1/GE2/1/2
3.3.3.3/32 NULL/1024 -/POS5/1/0
[RouterC] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC In/Out Label In/Out IF Vrf Name
4.4.4.4/32 1024/3 GE2/1/2/GE2/1/1
3.3.3.3/32 3/NULL POS5/1/0/-
[RouterD] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC In/Out Label In/Out IF Vrf Name
4.4.4.4/32 3/NULL GE2/1/1/-
[RouterE] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC In/Out Label In/Out IF Vrf Name
3.3.3.3/32 1024/3 POS5/1/0/POS5/1
Execute the display mpls te tunnel command on each router. You can see that two MPLS TE tunnels
are traversing Router B and Router C.
[RouterA] display mpls te tunnel
LSP-Id Destination In/Out-If Name
1.1.1.1:1 4.4.4.4 -/GE2/1/1 Tunnel4
[RouterB] display mpls te tunnel
LSP-Id Destination In/Out-If Name
1.1.1.1:1 4.4.4.4 GE2/1/1/GE2/1/2 Tunnel4
2.2.2.2:1 3.3.3.3 -/POS5/1/0 Tunnel5
[RouterC] display mpls te tunnel
LSP-Id Destination In/Out-If Name
1.1.1.1:1 4.4.4.4 GE2/1/2/GE2/1/1 Tunnel4
2.2.2.2:1 3.3.3.3 POS5/1/0/- Tunnel5
[RouterD] display mpls te tunnel