R3102-R3103-HP 6600/HSR6600 Routers MPLS Configuration Guide

173
Task Command Remarks
Display information about static
VCs.
display mpls static-l2vc [ interface
interface-type interface-number
[ service-instance instance-id ] ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display information about Martini
VCs.
display mpls l2vc [ interface interface-type
interface-number [ service-instance
instance-id ] | remote-info ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display information about
Kompella VCs.
display mpls l2vpn connection [ vpn-name
vpn-name [ remote-ce ce-id | down | up |
verbose ] | summary | interface
interface-type interface-number ] [ | { begin
| exclude | include } regular-expression ]
Available in any view.
Display information about L2VPN
in the BGP routing table.
display bgp l2vpn { all | group
[ group-name ] | peer [ [ ip-address ]
verbose ] | route-distinguisher rd [ ce-id
ce-id [ label-offset label-offset ] ] } [ | { begin
| exclude | include } regular-expression ]
Available in any view.
Display L2VPN information on a
PE.
display mpls l2vpn [ export-route-target-list
| import-route-target-list | vpn-name
vpn-name [ local-ce | remote-ce ] ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display MPLS L2VPN AC
information.
display mpls l2vpn fib ac vpws [ interface
interface-type interface-number
[ service-instance service-instanceid ] ] [ slot
slot-number ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display MPLS L2VPN PW
information.
display mpls l2vpn fib pw vpws [ interface
interface-type interface-number
[ service-instance service-instanceid ] ] [ slot
slot-number ] [ verbose ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display information about one or
all PW classes.
display pw-class [ pw-class-name ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
MPLS L2VPN configuration examples
Example for configuring a local CCC connection
Network requirements
The CEs are connected to the PE through Serial interfaces. The link layer encapsulation protocol is PPP.
Create a local CCC connection on the PE, so the PE can directly forward packets between CE 1 and CE
2 without looking up the forwarding table, improving the forwarding speed.