R3102-R3103-HP 6600/HSR6600 Routers Network Management and Monitoring Command Reference

171
Examples
# Set the NetStream aggregation mode as AS, and enter the NetStream AS aggregation view.
<Sysname> system-view
[Sysname] ip netstream aggregation as
[Sysname-ns-aggregation-as]
Related commands
enable
ip netstream export host
ip netstream export source
ip netstream export host
Use ip netstream export host to set the destination address and destination UDP port number for
NetStream data export.
Use undo ip netstream export host to delete the specified or all export addresses that are configured in
the specified view.
Syntax
ip netstream export host ip-address udp-port [ vpn-instance vpn-instance-name ]
undo ip netstream export host [ ip-address [ vpn-instance vpn-instance-name ] ]
Default
No destination address or destination UDP port number is configured in system view or aggregation
view.
Views
System view, NetStream aggregation view
Default command level
3: Manage level
Parameters
ip-address: Specifies a destination IP address for NetStream data export.
udp-port: Specifies a destination UDP port number for NetStream data export, in the range of 0 to
65535.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN that the NetStream data export destination
belongs to. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the
destination is on the public network, do not specify this option.
Usage guidelines
You can configure the same destination address and destination UDP port number in different
aggregation views.
The destination address and destination UDP port number configured in aggregation view takes
precedence over those configured in system view. If no destination address or destination UDP port
number is configured in aggregate view, those configured in system view apply.
Up to four different destination addresses, including addresses in different VPNs, can be configured in
one aggregation view. If you have configured the destination addresses with the same IP addresses but