R3102-R3103-HP 6600/HSR6600 Routers Network Management and Monitoring Command Reference

239
sFlow configuration commands
The sFlow configuration commands are available on only SAP interface modules that are operating in
bridge mode.
display sflow
Use display sflow to display the sFlow configuration and operation information.
Syntax
display sflow [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
slot slot-number: Specifies a card by its slot number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the sFlow configuration and operation information of slot 2.
<Sysname> display sflow slot 2
sFlow Version: 5
sFlow Global Information:
Agent IP:10.10.10.1(Auto)
Source Address:10.0.0.1 2001::1
Collector Information
ID IP Port Aging Size Description
1 22:2:20::10 6535 N/A 3000 netserver
2 192.168.3.5 6543 500 3000 Office
3 6343 0 1400
4 6343 0 1400
5 6343 0 1400
6 6343 0 1400
7 6343 0 1400
8 6343 0 1400
9 6343 0 1400