R3102-R3103-HP 6600/HSR6600 Routers Network Management and Monitoring Command Reference

54
[Sysname-nqa-admin-test-tcp] reaction 1 checked-element probe-fail threshold-type
consecutive 3 action-type trigger-only
Related commands
track (High Availability Command Reference)
reaction checked-element rtt
Use reaction checked-element rtt to configure a reaction entry for monitoring packet round-trip time. You
cannot edit a reaction entry. To change the attributes in a reaction entry, use undo reaction to delete the
entry first and then configure a new one.
Use undo reaction to delete the specified reaction entry.
Syntax
reaction item-number checked-element rtt threshold-type { accumulate accumulate-occurrences |
average } threshold-value upper-threshold lower-threshold [ action-type { none | trap-only } ]
undo reaction item-number
Default
No reaction entry for monitoring packet round-trip time is configured.
Views
UDP jitter operation view, voice operation view
Default command level
2: System level
Parameters
item-number: Specifies a reaction entry ID in the range of 1 to 10.
threshold-type: Specifies a threshold type.
accumulate accumulate-occurrences: Specifies the total number of threshold violations. The value is in the
range of 1 to 15000 for UDP jitter operation and 1 to 60000 for voice operation.
average: Specifies to check the packet average round-trip time.
threshold-value: Specifies threshold values in milliseconds.
upper-threshold: Specifies the upper threshold in the range of 0 to 3600000.
lower-threshold: Specifies the lower threshold in the range of 0 to 3600000. It must not be greater than
the upper threshold.
action-type: Specifies what action to be triggered. The default action is none.
none: Specifies the action of only displaying results on the terminal display.
trap-only: Specifies the action of displaying results on the terminal display and meanwhile sending
SNMP trap messages to the NMS.
Usage guidelines
Only successful probe packets are monitored. Failed probe packets are not counted.