R3102-R3103-HP 6600/HSR6600 Routers Security Command Reference

180
• If a NAS ID is configured using the portal nas-id command, the device uses the configured NAS ID
as that of the interface.
• If the interface has no NAS ID configured, the device uses the device name as the interface NAS ID.
Examples
# Specify NAS ID profile aaa for VLAN-interface 2.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] portal nas-id-profile aaa
portal nas-ip
Use portal nas-ip to configure an interface to use a specific source IP address for outgoing portal
packets.
Use undo portal nas-ip to delete the specified source IP address.
Syntax
portal nas-ip ip-address
undo portal nas-ip
Default
No source IP address is specified for outgoing portal packets on an interface, and the interface uses the
IP address of the user access interface as the source IP address for outgoing portal packets.
Views
Interface view
Default command level
2: System level
Parameters
ip-address: Specifies a source IP address for outgoing portal packets. This IP address must be a local IP
address, and cannot be 0.0.0.0, 255.255.255.255, a class D address, a class E address, or a loopback
address.
Examples
# Configure interface GigabitEthernet 3/0/1 to use 2.2.2.2 as the source IP address for outgoing portal
packets.
<Sysname> system-view
[Sysname] interface gigabitethernet 3/0/1
[Sysname-GigabitEthernet3/0/1] portal nas-ip 2.2.2.2
portal nas-port-id
Use portal nas-port-id to specify the NAS-Port-ID value carried in a RADIUS request.
Use undo portal nas-port-id to restore the default.
Syntax
portal nas-port-id nas-port-id-value