R3102-R3103-HP 6600/HSR6600 Routers Security Command Reference

484
Field Descri
p
tion
UDP session establishment rate UDP connection establishment rate.
ICMP sessions Number of ICMP connections.
ICMP session establishment rate ICMP connection establishment rate.
RAWIP sessions Number of RAWIP connections.
RAWIP session establishment rate RAWIP connection establishment rate.
display tcp-proxy protected-ip
Use display tcp-proxy protected-ip to display information about IP addresses protected by the TCP proxy
function.
Syntax
display tcp-proxy protected-ip [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
slot slot-number: Displays information about protected IP addresses on a card. slot-number specifies the
number of the slot that holds the card.
The following matrix shows the option and router compatibility:
Option 6602 HSR6602 6604/6608/6616
slot slot-number No Yes Yes
Usage guidelines
For an HSR6602/6604/6608/6616 router, if you do not specify any parameter, this command displays
information about the protected IP addresses on all cards.
Examples
# Display information about all IP addresses protected by the TCP proxy function.
<Sysname> display tcp-proxy protected-ip
Protected IP Port Number Type Lifetime(min) Rejected packets
1.1.1.1 any Dynamic 1 2
Table 80 Command output
Field Descri
p
tion
Protected IP IP address under the protection of TCP proxy.
Port Number
Destination port number of the TCP connection request.
If the value of this field is any, the TCP proxy processes all TCP
connection requests destined for the IP address.