R3102-R3103-HP 6600/HSR6600 Routers Security Configuration Guide

52
Configuration procedure
To configure accounting methods for an ISP domain:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter ISP domain view.
domain isp-name N/A
3. Enable the accounting
optional feature.
accounting optional
Optional.
Disabled by default.
With the accounting optional
feature, a device allows users
to use network resources when
no accounting server is
available or communication
with all accounting servers
fails.
4. Specify the default accounting
method for all types of users.
accounting default { hwtacacs-scheme
hwtacacs-scheme-name [ local ] | local
| none | radius-scheme
radius-scheme-name [ local ] }
Optional.
The default accounting method
is local for all types of users.
5. Specify the command
accounting method.
accounting command
hwtacacs-scheme
hwtacacs-scheme-name
Optional.
The default accounting method
is used by default.
6. Specify the accounting
method for DVPN users.
accounting dvpn { local | none |
radius-scheme radius-scheme-name
[ local ] }
Optional.
The default accounting method
is used by default.
7. Specify the accounting
method for LAN users.
accounting lan-access { local | none |
radius-scheme radius-scheme-name
[ local | none ] }
Optional.
The default accounting method
is used by default.
This command is supported
only on SAP interface modules
that are operating in Layer 2
mode.
Accounting statistics is
collected per port for 802.1X.
8. Specify the accounting
method for login users.
accounting login { hwtacacs-scheme
hwtacacs-scheme-name [ local ] | local
| none | radius-scheme
radius-scheme-name [ local ] }
Optional.
The default accounting method
is used by default.
9. Specify the accounting
method for portal users.
accounting portal { local | none |
radius-scheme radius-scheme-name
[ local ] }
Optional.
The default accounting method
is used by default.
10. Specify the accounting
method for PPP users.
accounting ppp { hwtacacs-scheme
hwtacacs-scheme-name [ local ] | local
| none | radius-scheme
radius-scheme-name [ local ] }
Optional.
The default accounting method
is used by default.