R3303-HP 6600/HSR6600 Routers ACL and QoS Command Reference

92
undo qos pql pql-index queue { bottom | middle | normal | top } queue-length
Default
The queue length values for the four priority queues are as follows:
Views
System view
Default command level
2: System level
Parameters
pql-index: PQL index in the range of 1 to 16.
queue-length: Queue length for the specified queue, in the range of 1 to 1024. 20 for the top queue
• 20 for the top queue
• 40 for the middle queue
• 60 for the normal queue
• 80 for the bottom queue
Usage guidelines
If a queue is full, all subsequent packets to this queue are dropped.
Examples
# Set the length of the top queue in PQL 10 to 10.
<Sysname> system-view
[Sysname] qos pql 10 queue top queue-length 10
Related commands
• qos pql default-queue
• qos pql protocol
• qos pq
CQ commands
display qos cq interface
Use display qos cq interface to display the custom queuing (CQ) configuration and statistics on an
interface.
Syntax
display qos cq interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level