R3303-HP 6600/HSR6600 Routers Fundamentals Command Reference

182
The following matrix shows the option and router compatibility:
O
p
tion 6602 HSR6602 6604/6608/6616
subslot subslot-number No Yes Yes
Usage guidelines
Unmounting a card or subcard stops the services provided on the card or subcard.
Interfaces on an unmounted subcard are unconfigurable and cannot be used.
After you use the undo remove command to mount a subcard back, a configuration restoration process
occurs. If you reboot the subcard before the process is completed, an error message appears: "This card
is being configured. You can’t reboot it now."
Examples
# Unmount the card in slot 2.
<sysname> remove slot 2
This command will remove the specified board, Continue? [Y/N]:y
You can not configure the card now.
Please wait...
You can pull out the card now.
Related commands
collection-interval
reset unused porttag
On an 6602 or HSR6602, use reset unused porttag to clear unused 16-bit interface indexes.
On an 6604, 6608, or 6616, use reset unused porttag to clear unused 16-bit interface indexes of the
active MPU and the standby MPUs.
Syntax
reset unused porttag
Views
User view
Default command level
1: Monitor level
Usage guidelines
A confirmation is required when you execute this command. The command will not run if you enter N to
cancel the operation or fail to make a confirmation within 30 seconds.
Examples
# Clear unused 16-bit interface indexes.
<Sysname> reset unused porttag
Current operation will delete all unused port tag(s). Continue? [Y/N]:y
<Sysname>