R3303-HP 6600/HSR6600 Routers Fundamentals Command Reference

92
bad block(6) 2206
3971 block(s) total, 6 block(s) bad.
Table 13 Command output
Field Descri
p
tion
No Serial number of the bad blocks.
Physical block Serial number of the physical pages with bad blocks.
3971 block(s) total, 6 block(s) bad. Counts of blocks and bad blocks in the NAND Flash memory.
display nandflash page-data
Use display nandflash page-data to display the data on a physical page in the NAND Flash memory.
Syntax
display nandflash page-data page-value [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
3: Manage level
Parameters
page-value: Serial number of a physical page.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
This command is always used in combination with the display nandflash file-location command to verify
the correctness of the data in the NAND Flash memory.
This command is supported only on HSR6602 routers.
Examples
# Display the content of the file system.xml that is saved in the NAND Flash memory.
<HSR6602>display nandflash badblock-location
No. Physical block
------------------------------
bad block(1) 2196
bad block(2) 2198
bad block(3) 2200
bad block(4) 2202
bad block(5) 2204