R3303-HP 6600/HSR6600 Routers Fundamentals Configuration Guide

120
Ste
p
Command
1. Enter system view.
system-view
2. Stop running patches.
• 6602:
patch deactive [ patch-number ]
• HSR6602/6604/6608/6616:
patch deactive [ patch-number ] slot slot-number
Removing patches from the patch memory area
After being removed from the patch memory area, a patch is still retained in IDLE state in the storage
medium. The system runs the way it did before it was installed with the patch.
To remove patches from the patch memory area:
Ste
p
Command
1. Enter system view.
system-view
2. Remove patches from the
patch memory area.
• 6602:
patch delete [ patch-number ]
• HSR6602/6604/6608/6616:
patch delete [ patch-number ] slot slot-number
Displaying and maintaining software upgrade
Task Command Remarks
Display the system software
image information.
display boot-loader [ slot slot-number ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display information about the
installed patch package or
patch files.
display patch [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display the patch information.
display patch information [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Software upgrade examples
Upgrading the system software on the 6602/HSR6602 router
Network requirement
The current system software version is soft-version1 for the router in Figure 54. The latest system software
image soft-version2.bin and the latest configuration file new-config.cfg are both saved in the aaa
directory of the FTP server. The router and the FTP server can reach each other, and the PC and the router
can reach each other.
Upgrade the software version of the router to soft-version2 and configuration file to new-config.