R3303-HP 6600/HSR6600 Routers Fundamentals Configuration Guide

150 Opening ASCII mode data connection for /newest.bin.

226 Transfer complete.

ftp> bye

221 Server closing.

c:\>

This FTP procedure also applies to upgrading configuration files.

NOTE:

fter you finish transferrin

the Boot ROM image through FTP, execute the bootrom update command to

upgrade Boot ROM.

3. Upgrade the router:

# Specify newest.bin as the main system software image file for the next startup.

<Router> boot-loader file newest.bin main

IMPORTANT:

The system software image file used for the next startup and the startup confi

uration file must be saved in

the root directory of the storage medium.

# Reboot the router and the system software image file is updated at the system reboot.

<Router> reboot

FTP server configuration example (6604/6608/6616)

Network requirements

Create a local user account with the username abc and password abc and enable FTP server on the

router in Figure 44. U

se the user account to log in to the FTP server from the FTP client, upload the file

newest.bin from the FTP client to the FTP server, and download the configuration file config.cfg from the

FTP server to the FTP client for backup.

Figure 44 Network diagram

Configuration procedure

1. Configure the router (FTP server):

# Create a local user account abc, set its password to abc and the user privilege level to level 3 (the

manage level), specify the root directory of the active MPU's CF card as the authorized directory,

and specify the service type as FTP.

<Router> system-view

[Router] local-user abc

[Router-luser-abc] password simple abc

[Router-luser-abc] authorization-attribute level 3

[Router-luser-abc] authorization-attribute work-directory cfa0:/