R3303-HP 6600/HSR6600 Routers High Availability Command Reference

103
undo rpr timer { atd | holdoff | keepalive | stability | tc-fast | tc-slow | tp-fast | tp-slow | wtr }
Default
• The ATD timer is 1 second.
• The hold-off timer is 0 milliseconds.
• The keepalive timer is 3 milliseconds.
• The topology stability timer is 40 milliseconds.
• The TC fast timer is 10 milliseconds.
• The TC slow timer is 100 milliseconds.
• The TP fast timer is 10 milliseconds.
• The TP slow timer is 100 milliseconds.
• The WTR timer is 10 seconds.
Views
Layer 3 RPR logical interface view
Default command level
2: System level
Parameters
atd atd-value: Sets the ATD timer, in the range of 1 to 10 seconds.
holdoff holdoff-value: Sets the hold-off timer, in steps of 10 milliseconds. The value range for the
holdoff-value argument is 0 to 200 milliseconds.
keepalive keepalive-value: Sets the keepalive timer, in the range of 2 to 50 milliseconds.
stability stability-value: Sets the topology stability timer, in the range of 10 to 100 milliseconds.
tc-fast tc-fast-value: Sets the TC fast timer, in the range of 1 to 20 milliseconds.
tc-slow tc-slow-value: Sets the TC slow timer, which is in steps of 50 milliseconds. The value range for the
tc-slow-value argument is 50 to 10000 milliseconds.
tp-fast tp-fast-value: Sets the TP fast timer, in the range of 1 to 20 milliseconds.
tp-slow tp-slow-value: Sets the TP slow timer, in steps of 50 milliseconds. The value range for the
tp-slow-value argument is 50 to 10000 milliseconds.
wtr wtr-value: Sets the WTR timer, in the range of 0 to 1440 seconds.
Examples
# Set the ATD timer to three seconds on Layer 3 RPR logical interface RPR 1.
<Sysname> system-view
[Sysname] interface rpr 1
[Sysname-RPR1] rpr timer atd 3
rpr weight
Use rpr weight to set the weight of a station.
Use undo rpr weight to restore the default.