R3303-HP 6600/HSR6600 Routers High Availability Command Reference

104
Syntax
rpr weight { ringlet0 | ringlet1 } value
undo rpr weight { ringlet0 | ringlet1 }
Default
The weight of a station is 2
0
=1.
Views
Layer 3 RPR logical interface view
Default command level
2: System level
Parameters
ringlet0: Sets the Ringlet 0 weight of the station.
ringlet1: Sets the Ringlet 1 weight of the station.
value: Expresses the weight as 2
value
. The value argument is in the range of 0 to 7.
Examples
# Set the weight of the station on Ringlet 0 to 4—two squared—on Layer 3 RPR logical interface RPR 1.
<Sysname> system-view
[Sysname] interface rpr 1
[Sysname-RPR1] rpr weight ringlet0 2
service
Use service to specify the card that processes traffic for the current RPR logical interface.
Use undo service to restore the default.
Syntax
service slot slot-number
undo service slot
Default
Traffic of an RPR logical interface is processed by the card where the receiving RPR physical port resides.
Views
Layer 3 RPR logical interface view
Default command level
2: System level
Parameters
slot slot-number: Specifies the slot number of the card that processes traffic for the current interface.
Usage guidelines
If the card specified by this command is removed, traffic of the current RPR logical interface cannot be
forwarded. After the card is installed again, it resumes traffic forwarding for the RPR logical interface.