R3303-HP 6600/HSR6600 Routers High Availability Command Reference

80
Parameters
dmac: Displays statistics for traffic sent to destination stations specified by their MAC address.
smac: Displays statistics for traffic received from source stations specified by their source MAC addresses.
mac-address: Specifies the MAC address of a source or destination station. If the argument is specified,
this command displays statistics about the traffic sent to or received from the specified station.
rpr interface-number: Specifies an RPR logical interface by its type and number. If no RPR logical
interface is specified, this command displays traffic statistics of all the RPR stations on your device.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display traffic statistics sent out from the station whose MAC address is 00E0-FC00-1A01 on the ring.
<Sysname> display rpr statistics smac 00e0-fc00-1a01
Traffic statistics from the source station on interface: RPR1
MAC-Address Packets Bytes
-------------------------------------
00e0-fc00-1a01 0 0
Table 29 Command output
Field Descri
p
tion
Traffic statistics from the source station
on interface
Source MAC address-based traffic statistics for the station
corresponding to the specified interface.
Traffic statistics to the destination station
on interface
Destination MAC address-based traffic statistics for the station
corresponding to the specified interface.
MAC-Address MAC address of the source or destination station.
display rpr timers
Use display rpr timers to display RPR timers.
Syntax
display rpr timers [ rpr interface-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level