R3303-HP 6600/HSR6600 Routers Interface Command Reference

ManualsBrandsHP ManualsNetwork HardwareHP HSR6602-G Router

Line protocol current state: UP

Description: Serial1/0/1 Interface

The Maximum Transmit Unit is 1500, Hold timer is 10(sec)

Internet Address is 9.9.9.6/24 Primary

Link layer protocol is PPP

LCP opened, IPCP opened

Output queue : (Urgent queuing : Size/Length/Discards) 0/100/0

Output queue : (Protocol queuing : Size/Length/Discards) 0/500/0

Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0

Physical layer is synchronous, Baudrate is 64000 bps

Interface is DCE, Cable type is V35, Clock mode is DCECLK

Last clearing of counters: Never

Last 70 seconds input rate 2.40 bytes/sec, 19 bits/sec, 0.20 packets/sec

Last 70 seconds output rate 2.40 bytes/sec, 19 bits/sec, 0.20 packets/sec

Input: 6668 packets, 80414 bytes

0 broadcasts, 0 multicasts

0 errors, 0 runts, 0 giants

0 CRC, 0 align errors, 0 overruns

0 dribbles, 0 aborts, 0 frame errors

Output:6670 packets, 80446 bytes

0 errors, 0 underruns, 0 collisions

0 deferred

DCD=UP DTR=UP DSR=UP RTS=UP CTS=UP

# Display brief information about serial interface Serial 1/0/1.

<Sysname> display interface serial 1/0/1 brief

The brief information of interface(s) under route mode:

Link: ADM - administratively down; Stby - standby

Protocol: (s) - spoofing

Interface Link Protocol Main IP Description

S1/0/1 UP UP 9.9.9.6/24 --

# Display brief information about all serial interfaces in the DOWN state.

<Sysname> display interface serial brief down

The brief information of interface(s) under route mode:

Link: ADM - administratively down; Stby - standby

Interface Link Cause

S1/0/1 ADM Administratively

Table 16 Command output

Field Descri

tion

Serial1/0/1 current state

Current physical state of the serial interface:

• DOWN (Administratively)—The serial interface was shut

down with the shutdown command, in other words, the

serial interface is administratively down.

• DOWN—The serial interface is physically down (possibly

because no physical link is present or the link has failed).

• UP—The serial interface is both administratively and

physically up.