R3303-HP 6600/HSR6600 Routers Interface Command Reference

78
reset counters interface
Use reset counters interface to clear the statistics for cellular interfaces.
Syntax
reset counters interface [ serial [ interface-number ] ]
Views
Use view
Default command level
2: System level
Parameters
serial interface-number: Specifies a serial interface.
Usage guidelines
When you collect traffic statistics for a specific period of time on a serial interface, clear the existing
statistics on the interface.
• If you do not specify the serial keyword, this command clears statistics on all interfaces.
• If you specify the serial keyword without the interface-number argument, this command clears
statistics on all serial interfaces.
• If you specify both the serial keyword and the interface-number argument, this command clears
statistics on a specified serial interface.
Examples
# Clear statistics on interface Serial 1/0/0.
<Sysname> reset counters interface serial 1/0/0
reverse-rts
Use reverse-rts to reverse RTS signal in synchronous mode for debugging purpose.
Use undo reverse-rts to restore the default.
Syntax
reverse-rts
undo reverse-rts
Default
RTS signal reverse is disabled.
Views
Synchronous serial interface view
Default command level
2: System level
Usage guidelines
This command is used in hardware flow control where the remote is not allowed to send data when the
local end is doing that.