R3303-HP 6600/HSR6600 Routers Interface Configuration Guide

[RouterA] port ilnk-mode route

[RouterA-Ten-GigabitEthernet1/0/0] ip address 11.1.1.1 255.0.0.0

[RouterA-Ten-GigabitEthernet1/0/0] quit

# Configure a static route to Router B.

[RouterA] ip route-static 22.1.1.0 255.0.0.0 11.1.1.2

2. Configure Router C:

# Configure an IP address for the interface Ten-GigabitEthernet 1/0/0.

<RouterC> system-view

[RouterC] interface Ten-GigabitEthernet1/0/0

[RouterC] port ilnk-mode route

[RouterC-Ten-GigabitEthernet1/0/0] ip address 22.1.1.2 255.0.0.0

[RouterC-Ten-GigabitEthernet1/0/0] quit

# Configure a static route to Router B.

[RouterC] ip route-static 11.1.1.0 255.0.0.0 22.1.1.1

3. On Router B, configure fast forwarding and IP addresses for Ten-GigabitEthernet 1/0/0 and

Ten-GigabitEthernet 2/0/0.

<RouterB> system-view

[RouterB] interface Ten-GigabitEthernet1/0/0

[RouterB] port ilnk-mode route

[RouterB-Ten-GigabitEthernet1/0/0] ip fast-forwarding

[RouterB-Ten-GigabitEthernet1/0/0] ip address 11.1.1.2 255.0.0.0

[RouterB-Ten-GigabitEthernet1/0/0] quit

[RouterB] interface Ten-GigabitEthernet2/0/0

[RouterB] port ilnk-mode route

[RouterB-Ten-GigabitEthernet2/0/0] ip fast-forwarding

[RouterB-Ten-GigabitEthernet2/0/0] ip address 22.1.1.1 255.0.0.0

[RouterB-Ten-GigabitEthernet2/0/0] quit

Verifying the configuration

# Ping Ten-GigabitEthernet 1/0/0 of Router C from Router A.

[RouterA] ping 22.1.1.2

PING 22.1.1.2: 56 data bytes, press CTRL_C to break

Reply from 22.1.1.2: bytes=56 Sequence=1 ttl=254 time=2 ms

Reply from 22.1.1.2: bytes=56 Sequence=2 ttl=254 time=1 ms

Reply from 22.1.1.2: bytes=56 Sequence=3 ttl=254 time=1 ms

Reply from 22.1.1.2: bytes=56 Sequence=4 ttl=254 time=2 ms

Reply from 22.1.1.2: bytes=56 Sequence=5 ttl=254 time=2 ms

--- 22.1.1.2 ping statistics ---

5 packet(s) transmitted

5 packet(s) received

0.00% packet loss

round-trip min/avg/max = 2/2/3 ms

The output shows that the ping operation succeeds.

# Display fast forwarding configurations on Router B.