R3303-HP 6600/HSR6600 Routers Interface Configuration Guide

78
Configuring the interface/channel operating mode on a 622 Mbps E-CPOS interface
Use the using command to configure a 622 Mbps E-CPOS interface to operate in channelized mode or
concatenated mode. To create POS channels, configure the concatenated mode. On a 622 Mbps
E-CPOS interface in concatenated mode, you can create four 155 Mbps or one 622 Mbps POS interface.
1. Configure the operating mode of a 622 Mbps E-CPOS interface
To configure the operating mode of a 622 Mbps E-CPOS interface:
Ste
p
Command Remarks
1. Enter system view.
system-view
N/A
2. Enter 622 Mbps E-CPOS interface
view.
controller e-cpos interface-number N/A
3. Configure the interface to operate in
concatenated mode.
using oc-12c
The default is the
channelized mode.
2. Create a 155 Mbps POS channel and configure its operating mode
To create a 155 Mbps POS channel and configure its operating mode on a 622 Mbps E-CPOS
interface:
Ste
p
Command Remarks
1. Enter system view
system-view N/A
2. Enter 622 Mbps E-CPOS
interface view
controller e-cpos interface-number N/A
3. Create a 155 Mbps channel
and enter its view
oc-3 oc-3-number N/A
4. Configure the 155 Mbps
channel to operate in
concatenated mode
using oc-3c
Optional.
The default is the channelized
mode.
Configuring the operating mode for a 155 Mbps E-CPOS interface
You can use the using command to configure a 155 Mbps E-CPOS interface to operate in channelized
mode or concatenated mode. To create POS channels, configure the concatenated mode. On a 155
Mbps E-CPOS interface in concatenated mode, you can create one 155 Mbps POS interface.
To configure the operating mode of a 155 Mbps E-CPOS interface:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter E-CPOS interface view.
controller e-cpos interface-number N/A
3. Configure the 155 Mbps
E-CPOS interface to operate in
concatenated mode.
using oc-3c
The default is the channelized
mode.