R3303-HP 6600/HSR6600 Routers IP Multicast Command Reference

234

undo peer { group-name | ip-address } default-route-advertise

Default

No default route is advertised to a peer or a peer group.

Views

IPv4 MBGP address family view

Default command level

2: System level

Parameters

group-name: Specifies an IPv4 MBGP peer group by its name, a string of 1 to 47 characters.

ip-address: Specifies an IPv4 MBGP peer by its IP address.

route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63 characters.

Usage guidelines

When you use this command, the router unconditionally sends a default route with the next hop as itself

to the peer or the peer group regardless of whether the default route is available in the routing table.

Examples

# In IPv4 MBGP address family view, advertise a default route to the existing peer group test.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] group test external

[Sysname-bgp] peer test as-number 200

[Sysname-bgp] ipv4-family multicast

[Sysname-bgp-af-mul] peer test enable

[Sysname-bgp-af-mul] peer test default-route-advertise

peer enable (MBGP address family view)

Use peer enable to enable the specified MBGP peer or peer group.

Use undo peer enable to disable the specified MBGP peer or peer group.

Syntax

peer { group-name | ip-address } enable