R3303-HP 6600/HSR6600 Routers IP Multicast Command Reference

277
Field Descri
p
tion
Upstream interface
Upstream interface of the (S, G) entry. Multicast packets should arrive
through this interface.
List of 2 downstream interfaces
Downstream interface list. These interfaces must forward multicast
packets.
Related commands
display multicast ipv6 forwarding-table
display multicast ipv6 rpf-info
Use display multicast ipv6 rpf-info to display RPF information of an IPv6 multicast source.
Syntax
display multicast ipv6 rpf-info ipv6-source-address [ ipv6-group-address ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ipv6-source-address: Specifies an IPv6 multicast source address.
ipv6-group-address: Specifies an IPv6 multicast group address in the range of FFxy::/16 (excluding
FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal numbers from
0 to F.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display all RPF information of the multicast source with an IPv6 address 2001::101.
<Sysname> display multicast ipv6 rpf-info 2001::101
RPF information about source 2001::101:
RPF interface: GigabitEthernet2/1/1, RPF neighbor: 2002::201
Referenced prefix/prefix length: 2001::/64
Referenced route type: igp
Route selection rule: preference-preferred
Load splitting rule: disable