R3303-HP 6600/HSR6600 Routers IP Multicast Command Reference

321
Views
MLD view
Default command level
2: System level
Parameters
interval: Specifies an MLD other querier present interval in seconds, in the range of 60 to 300.
Examples
# Set the MLD other querier present interval to 200 seconds globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] timer other-querier-present 200
Related commands
• display mld interface
• max-response-time
• mld timer other-querier-present
• robust-count
• timer query
timer query (MLD view)
Use timer query to configure the MLD query interval globally.
Use undo timer query to restore the default.
Syntax
timer query interval
undo timer query
Default
The MLD query interval is 125 seconds.
Views
MLD view
Default command level
2: System level
Parameters
interval: Specifies an MLD query interval (time between MLD general queries) in seconds, in the range
of 1 to 18000.
Examples
# Set the MLD query interval to 200 seconds globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] timer query 200