R3303-HP 6600/HSR6600 Routers IP Multicast Command Reference

63
display igmp group port-info
Use display igmp group port-info to display Layer 2 port information of IGMP groups, including both
dynamic and static Layer 2 port entries.
Syntax
display igmp group port-info [ vlan vlan-id ] [ slot slot-number ] [ verbose ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
vlan-id: Specifies a VLAN ID in the range of 1 to 4094. If you do not specify a VLAN, this command
displays the Layer 2 port information of IGMP groups in all VLANs.
slot slot-number: Specifies a card by its slot number. If no slot is specified, this command displays the
Layer 2 port information of IGMP groups for the MPU.
The following matrix shows the option and router compatibility:
Option 6602 HSR6602 6604/6608/6616
slot slot-number No Yes Yes
verbose: Displays detailed information about Layer 2 ports of IGMP groups.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display detailed Layer 2 port information of IGMP groups.
<Sysname> display igmp group port-info verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):2.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 1 port(s).
GE2/1/1 (D) ( 00:01:30 )