R3303-HP 6600/HSR6600 Routers Layer 2 - LAN Switching Command Reference

164
OperMau : speed(1000)/duplex(Full)
Power port class : PD
PSE power supported : No
PSE power enabled : No
PSE pairs control ability : No
Power pairs : Signal
Port power classification : Class 0
Link aggregation supported : Yes
Link aggregation enabled : No
Aggregation port ID : 0
Maximum frame Size: 1500
# Display the LLDP information sent from all neighboring devices in a list.
<Sysname> display lldp neighbor-information list
System Name Local Interface Chassis ID Port ID
HSR6602 GE0/0/1 0023-89b6-ecfe GigabitEthernet0/0/1
Table 38 Command output
Field Descri
p
tion
LLDP neighbor-information of port 3 LLDP information received through port 3.
Update time
Time when LLDP information about a neighboring device was last
updated.
Chassis type
Chassis ID representation:
• Chassis component.
• Interface alias.
• Port component.
• MAC address.
• Network address (ipv4).
• Interface name.
• Locally assigned—Locally-defined chassis type other than those
listed above.
Chassis ID
ID that identifies the LLDP sending device: MAC address, network
address, interface, or some other value depending on the chassis
type.
Port ID type
Port ID representation:
• Interface alias.
• Port component.
• MAC address.
• Network address (ipv4).
• Interface name.
• Agent circuit ID.
• Locally assigned—Locally-defined port ID type other than those
listed above.