R3303-HP 6600/HSR6600 Routers Layer 2 - LAN Switching Command Reference

177
Examples
# Set the TTL multiplier to 6.
<Sysname> system-view
[Sysname] lldp hold-multiplier 6
Related commands
lldp timer tx-interval
lldp management-address-format string
Use lldp management-address-format string to encapsulate the management address in the form of
strings in TLVs.
Use undo lldp management-address-format to restore the default.
Syntax
lldp management-address-format string
undo lldp management-address-format
Default
The management address is encapsulated in the form of numbers in TLVs.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, port group view
Default command level
2: System level
Usage guidelines
The following matrix shows the command and router compatibility in Layer 2 Ethernet interface view:
Command 6602 HSR6602 6604/6608/6616
lldp management-address-format string No No
Yes on SAP modules
operating in bridge mode
The following matrix shows the command and router compatibility in port group view:
Command 6602 HSR6602 6604/6608/6616
lldp management-address-format string No No
Yes on routers installed
with the MPU RPE-X1 or
RSE-X1
Examples
# Configure GigabitEthernet 4/0/1 to encapsulate the management address in the form of strings in
management address TLVs.
<Sysname> system-view
[Sysname] interface GigabitEthernet 4/0/1
[Sysname-GigabitEthernet4/0/1] lldp management-address-format string