R3303-HP 6600/HSR6600 Routers Layer 2 - WAN Command Reference Guide

5
Related commands
display interface
display atm class
Use display atm class to display the information about an ATM class.
Syntax
display atm class [ atm-class-name ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
atm-class-name: ATM class name, a string of 1 to 16 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you provide the atm-class-name argument, this command displays the information about the ATM class
identified by the argument.
If you do not specify the atm-class-name argument, this command displays the information about all the
ATM classes.
Examples
# Display the information about the ATM class named main.
<Sysname> display atm class main
ATM CLASS: main
Service ubr 8000
encapsulation aal5snap
Table 1 Command output
Field Descri
p
tion
ATM CLASS ATM class name.
Service ubr 8000 PVC's service type and the bit rate.
encapsulation aal5snap The type of ATM AAL5 encapsulation of the PVC is aal5snap.