R3303-HP 6600/HSR6600 Routers Layer 2 - WAN Command Reference Guide

155
Default
Fragmentation is disabled on the MFR bundle.
Views
MFR interface view
Default command level
2: System level
Examples
# Enable fragmentation on interface MFR 4/0/0.
<Sysname> system-view
[Sysname] interface mfr 4/0/0
[Sysname-MFR4/0/0] mfr fragment
mfr fragment-size
Use mfr fragment-size to configure the maximum fragment size allowed on a frame relay bundle link.
Use undo mfr fragment-size to restore the default.
Syntax
mfr fragment-size bytes
undo mfr fragment-size
Default
The maximum fragment size allowed on a frame relay bundle link is of 300 bytes.
Views
MFR interface view
Default command level
2: System level
Parameters
bytes: Fragment size in the range of 60 to 1500 in bytes.
Examples
# Configure the maximum fragment size allowed on interface MFR 4/0/0 to be 70 bytes.
<Sysname> system-view
[Sysname] interface mfr 4/0/0
[Sysname-MFR4/0/0] mfr fragment-size 70
mfr link-name
Use mfr link-name to set the frame relay bundle link identification (LID).
Use undo mfr link-name to restore the default.
Syntax
mfr link-name [ name ]