R3303-HP 6600/HSR6600 Routers Layer 2 - WAN Configuration Guide

107
Ste
p
Command Remarks
5. Specify a card to forward traffic
for the HDLC link bundle
interface.
• In standalone mode:
service slot slot-number
• In IRF mode:
service chassis
chassis-number slot
slot-number
Optional.
By default:
• If all member interfaces of the
HDLC link bundle interface are
on the same card, the card
processes or forwards traffic for
the bundle interface.
• If the member interfaces are on
different cards, the card with the
first selected member interface
on the member list processes or
forwards traffic for the bundle
interface. (For the member list of
an HDLC link bundle interface,
execute the display bundle
member hdlc-bundle
command.)
The SR6602 routers do not support
this command.
6. Set the minimum number of
selected member interfaces
required for bringing up the
HDLC link bundle.
bundle min-active links number
Optional.
By default, no minimum number of
selected member interfaces is
required for an HDLC link bundle to
be brought up.
7. Set the maximum number of
selected member interfaces
allowed in the HDLC link
bundle.
bundle max-active links number
Optional.
By default, the maximum number of
selected member interfaces
allowed in an HDLC link bundle is
not set.
8. Specify the minimum amount of
bandwidth required for bringing
up the HDLC link bundle.
bundle min-active bandwidth
bandwidth
Optional.
By default, the minimum amount of
bandwidth required for bringing up
an HDLC link bundle is not set.
9. Set the intended bandwidth for
the HDLC link bundle interface.
bandwidth bandwidth-value Optional.