R3303-HP 6600/HSR6600 Routers Layer 3 - IP Routing Command Reference

88
Authentication Sequence: [ 0 ]
Neighbor state change count: 6
LDP-sync Adjacency state: Up
Table 21 Command output
Field Descri
p
tion
Area areaID interface
IPAddress(InterfaceName)'s neighbors
Neighbor information of the interface in the specified area:
• areaID—Area to which the neighbor belongs.
• IPAddress—Interface IP address.
• InterfaceName—Interface name.
interface Interface attached with the neighbor.
Router ID Neighbor router ID.
Address Neighbor router address.
GR State GR state.
State
Neighbor state:
• Down—Initial state of a neighbor conversation.
• Init—The router has seen a Hello packet from the neighbor.
However, the router has not established. bidirectional
communication with the neighbor (the router itself did not
appear in the neighbor's hello packet).
• Attempt—Available only in an NBMA network, Under this
state, the OSPF router has not received any information from
a neighbor for a period but can send Hello packets at a
longer interval to keep neighbor relationship.
• 2-Way—Communication between the two routers is
bidirectional. The router itself appears in the neighbor's Hello
packet.
• Exstart—Determines which router is the master and the initial
Database Description (DD) sequence number.
• Exchange—The router is sending DD packets to the neighbor,
describing its entire link-state database.
• Loading—The router sends Link State Request packets to the
neighbor, requesting more recent LSAs.
• Full—The neighboring routers are fully adjacent.
Mode Neighbor mode for LSDB synchronization.
Priority Neighboring router priority.
DR DR on the interface's network segment.
BDR BDR on the interface's network segment.
MTU Interface MTU.
Dead timer due in 33 sec Dead timer times out in 33 seconds.
Neighbor is up for 02:03:35 The neighbor has been up for 02:03:35.
Authentication Sequence Authentication sequence number.
Neighbor state change count Count of neighbor state changes.