R3303-HP 6600/HSR6600 Routers Layer 3 - IP Routing Command Reference

257
Command 6602 HSR6602 6604/6608/6616
non-stop-routing No No
• Yes when using the RPE-X1 or RSE-X1
MPU
• No when using the MCP MPU
Examples
# Enable BGP NSR.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] non-stop-routing
peer advertise-community (BGP/BGP-VPN instance view)
Use peer advertise-community to advertise the community attribute to a peer/peer group.
Use undo peer advertise-community to disable the community attribute advertisement to a peer/peer
group.
Syntax
peer { group-name | ip-address } advertise-community
undo peer { group-name | ip-address } advertise-community
Default
No community attribute is advertised to any peer group/peer.
Views
BGP view, BGP-VPN instance view
Default command level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
Examples
# In BGP view, advertise the community attribute to peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test advertise-community
# In BGP-VPN instance view, advertise the community attribute to peer group test. (The VPN has been
created.)
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] peer test advertise-community
Related commands
• apply community