R3303-HP 6600/HSR6600 Routers Layer 3 - IP Routing Command Reference

308
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
Packets matching a deny-mode node are forwarded according to the routing table. Therefore, no
statistics are available for such packets.
Examples
# Display the statistics of PBR on GigabitEthernet 2/1/1.
<Sysname> display ip policy-based-route statistic interface gigabitethernet2/1/1
Interface GigabitEthernet2/1/1 policy based routing statistics information:
policy-based-route: aaa
permit node 5
if-match acl 3101
apply output-interface Serial2/1/0
matched: 0
Total matched:: 0
Table 58 Command output
Field Description
Interface GigabitEthernet2/1/1 policy
based routing statistics information
PBR statistics on GigabitEthernet 2/1/1.
policy-based-route: aaa Policy name.
permit node The match mode of node is permit.
if-match acl Match packets against ACL.
apply output-interface Output interface.
matched Matching packets on the node.
Total matched Total matching packets on all nodes.
display policy-based-route
Use display policy-based-route to display PBR policy information.
Syntax
display policy-based-route [ policy-name ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
policy-name: Displays information about the specified policy. A policy name is a string of 1 to 19
characters.