R3303-HP 6600/HSR6600 Routers Layer 3 - IP Routing Command Reference

376
Use undo ospfv3 dr-priority to restore the default value.
Syntax
ospfv3 dr-priority priority [ instance instance-id ]
undo ospfv3 dr-priority [ priority ] [ instance instance-id ]
Default
The DR priority on an interface defaults to 1.
Views
Interface view
Default command level
2: System level
Parameters
priority: Specifies a DR priority in the range of 0 to 255.
instance-id: Specifies an instance by its ID in the range of 0 to 255. The default is 0.
Usage guidelines
An interface's DR priority determines its privilege in DR/BDR selection, and the interface with the highest
priority is preferred.
Examples
# Set the DR priority for an interface in instance 1 to 8.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-Gigabitethernet2/1/1] ospfv3 dr-priority 8 instance 1
ospfv3 ipsec-policy
Use ospfv3 ipsec-policy to apply an IPsec policy on an OSPFv3 interface.
Use undo ospfv3 ipsec-policy to remove the IPsec policy from the OSPFv3 interface.
Syntax
ospfv3 ipsec-policy policy-name [ instance instance-id ]
undo ospfv3 ipsec-policy policy-name [ instance instance-id ]
Default
No IPsec policy is applied on an OSPFv3 interface.
Views
Interface view
Default command level
2: System level
Parameters
policy-name: Specifies an IPsec profile by its name, a string of 1 to 15 characters.
instance-id: Specifies an instance by its ID in the range of 0 to 255. The default is 0.