R3303-HP 6600/HSR6600 Routers Layer 3 - IP Routing Command Reference

40
Field Descri
p
tion
Flags Indicates the route state.
Sec Remaining time of the timer corresponding to the route state.
# Display the routing statistics of RIP process 1.
<Sysname> display rip 1 route statistics
Peer Aging Permanent Garbage
111.1.1.2 1 0 0
Total 1 0 0
Table 11 Command output
Field Description
Peer IP address of a neighbor.
Aging Total number of aging routes learned from the specified neighbor.
Permanent Total number of permanent routes learned from the specified neighbor.
Garbage
Total number of routes in the Garbage-collection state learned from the specified
neighbor.
Total Total number of routes learned from all RIP neighbors.
fast-reroute
Use fast-reroute to configure RIP fast reroute (FRR).
Use undo fast-reroute to restore the default.
Syntax
fast-reroute route-policy route-policy-name
undo fast-reroute
Default
RIP FRR is disabled.
Views
RIP view
Default command level
2: System level
Parameters
route-policy route-policy-name: References a routing policy to designate a backup next hop. The
route-policy-name argument is a case-sensitive string of 1 to 63 characters.
Usage guidelines
RIP FRR is only effective for non-recursive RIP routes that are learned from directly connected neighbors.
Do not use RIP FRR and BFD for RIP at the same time; otherwise, RIP FRR might fail to take effect.