R3303-HP 6600/HSR6600 Routers Layer 3 - IP Routing Configuration Guide

332
----------------------------------------------------------------------
Neighbor ID Pri State Dead Time Interface Instance ID
3.3.3.3 1 Full/Backup 00:00:34 GE2/2/0 0
OSPFv3 Area ID 0.0.0.1 (Process 1)
----------------------------------------------------------------------
Neighbor ID Pri State Dead Time Interface Instance ID
1.1.1.1 1 Full/DR 00:00:35 GE2/2/1 0
# Display OSPFv3 neighbor information on Router C.
[RouterC] display ospfv3 peer
OSPFv3 Area ID 0.0.0.0 (Process 1)
----------------------------------------------------------------------
Neighbor ID Pri State Dead Time Interface Instance ID
2.2.2.2 1 Full/DR 00:00:35 GE2/2/0 0
OSPFv3 Area ID 0.0.0.2 (Process 1)
----------------------------------------------------------------------
Neighbor ID Pri State Dead Time Interface Instance ID
4.4.4.4 1 Full/Backup 00:00:36 GE2/2/1 0
# Display OSPFv3 routing information on Router D.
[RouterD] display ospfv3 routing
I - Intra area route, E1 - Type 1 external route, N1 – Type 1 NSSA route
IA - Inter area route, E2 – Type 2 external route, N2 – Type 2 NSSA route
* - Selected route
OSPFv3 Router with ID (4.4.4.4) (Process 1)
------------------------------------------------------------------------
*Destination: 2001::/64
Type : IA Cost : 2
NextHop : FE80::F40D:0:93D0:1 Interface: GE2/2/1
*Destination: 2001:1::/64
Type : IA Cost : 3
NextHop : FE80::F40D:0:93D0:1 Interface: GE2/2/1
*Destination: 2001:2::/64
Type : I Cost : 1
NextHop : directly-connected Interface: GE2/2/1
*Destination: 2001:3::/64
Type : IA Cost : 4
NextHop : FE80::F40D:0:93D0:1 Interface: GE2/2/1
3. Configure Area 2 as a stub area:
# Configure Router D.
[RouterD] ospfv3