R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

91
Table 36 Command output
Field Descri
p
tion
Interface GigabitEthernet2/1/1 RSVP-TE enabled interface.
Token Bucket rate Token bucket rate, a traffic parameter.
Peak Data Rate Peak rate, a traffic parameter.
Tunnel Dest Tunnel destination, in the format of X.X.X.X.
Ingress LSR ID Ingress LSR ID, in the format of X.X.X.X.
Next Hop Addr Next hop address, in the format of X.X.X.X.
display mpls rsvp-te peer
Use display mpls rsvp-te peer to display information about RSVP-TE neighbors on the specified or all
interfaces.
Syntax
display mpls rsvp-te peer [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about RSVP-TE neighbors on all interfaces.
<Sysname> display mpls rsvp-te peer
Interface GigabitEthernet2/1/1
Neighbor Addr: 80.4.1.1
SrcInstance: 841 NbrSrcInstance: 928
PSB Count: 0 RSB Count: 1
Hello Type Sent: ACK Neighbor Hello Extension: ENABLE
SRefresh Enable: NO Reliability Enable: YES
Graceful Restart State: Ready