R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

92
Restart Time: 200 sec Recovery Time: 150 sec
Interface GigabitEthernet2/1/2
Neighbor Addr: 80.2.1.1
SrcInstance: 832 NbrSrcInstance: 920
PSB Count: 1 RSB Count: 0
Hello Type Sent: REQ Neighbor Hello Extension: ENABLE
SRefresh Enable: NO Reliability Enable: YES
Graceful Restart State: Not Ready
Restart Time: --- Recovery Time: ---
Table 37 Command output
Field Descri
p
tion
Interface GigabitEthernet2/1/1 RSVP-TE enabled interface.
Neighbor Addr: Neighbor address, in the format of X.X.X.X.
SrcInstance Instance of source Message ID.
NbrSrcInstance Instance of neighbor Message ID.
PSB Count Number of path state blocks.
RSB Count Number of reservation state blocks.
Hello Type Sent Type of hellos sent to the neighbor: REQ, ACK, or NONE.
Neighbor Hello Extension
State of hello extension: enabled or disabled. This field is displayed only
when hello extension is enabled on the interface.
SRefresh Enable State of summary refresh: YES for enabled and NO for disabled.
Reliability Enable State of the reliability function: YES for enabled and NO for disabled.
Graceful Restart State
Neighbor's GR status: Not Ready, Ready, Restart, or Recovery.
If this field is not supported, three hyphens (---) are displayed.
Restart Time GR restart interval in seconds.
Recovery Time GR recovery interval in seconds.
display mpls rsvp-te psb-content
Use display mpls rsvp-te psb-content to display information about RSVP-TE PSB.
Syntax
display mpls rsvp-te psb-content ingress-lsr-id lspid tunnel-id egress-lsr-id [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ingress-lsr-id: Ingress LSR ID.