R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

176
interface: Clears statistics about RSVP-TE for all interfaces.
interface interface-type interface-number: Specifies an interface by its type and number. If an interface
is specified, the command clears the statistics about RSVP-TE for the interface.
Examples
# Clear statistics about global RSVP-TE.
<Sysname> reset mpls rsvp-te statistics global
reset mpls te auto-bandwidth adjustment timers
Use reset mpls te auto-bandwidth adjustment timers to reset the automatic bandwidth adjustment
function.
Syntax
reset mpls te auto-bandwidth adjustment timers
Views
User view
Default command level
1: Monitor level
Usage guidelines
This command clears information about output rate sampling and the remaining time for next bandwidth
optimization.
Examples
# Reset the automatic bandwidth adjustment function.
<Sysname> reset mpls te auto-bandwidth adjustment timers
static-cr-lsp egress
Use static-cr-lsp egress to configure a static CR-LSP on the egress node.
Use undo static-cr-lsp egress to remove the static CR-LSP.
Syntax
static-cr-lsp egress tunnel-name incoming-interface interface-type interface-number in-label
in-label-value [ bandwidth [ ct0 | ct1 | ct2 | ct3 ] bandwidth-value ]
undo static-cr-lsp egress tunnel-name
Default
Static CR-LSP traffic belongs to CT 0.
Views
System view
Default command level
2: System level
Parameters
tunnel-name: Tunnel name, a case-sensitive string of 1 to 15 characters.