R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

Views

Any view

Default command level

1: Monitor level

Parameters

all: Displays all information about LDP.

verbose: Displays detailed information.

|: Filters command output by specifying a regular expression. For more information about regular

expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Usage guidelines

If you do not specify any parameter, the command will display all information about LDP in detail.

Examples

# Display all information about LDP in detail.

<Sysname> display mpls ldp all verbose

LDP Global Information

---------------------------------------------------------------

Protocol Version : V1 Neighbor Liveness : 60 Sec

Graceful Restart : Off FT Reconnect Timer : 60 Sec

MTU Signaling : Off Recovery Timer : 60 Sec

Nonstop Routing : On

LDP Instance Information

---------------------------------------------------------------

Instance ID : 0 VPN-Instance :

Instance Status : Active LSR ID : 1.1.1.1

Hop Count Limit : 32 Path Vector Limit : 32

Loop Detection : Off

DU Re-advertise Timer : 30 Sec DU Re-advertise Flag : On

DU Explicit Request : Off Request Retry Flag : On

Label Distribution Mode: Ordered Label Retention Mode : Liberal

-----------------------------------------------------------------

Table 4 Command output

Field Descri

tion

Protocol Version Version of the LDP protocol.

Neighbor Liveness Setting of the GR neighbor liveness timer.

Graceful Restart Indicates whether GR is enabled.

FT Reconnect Timer Setting of the GR's FT reconnect timer.