R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

185
Syntax
ce ce-name [ id ce-id [ range ce-range ] [ default-offset default-offset ] ]
undo ce ce-name
Views
MPLS L2VPN view, MPLS L2VPN CE view
Default command level
2: System level
Parameters
ce-name: Specifies the name that uniquely identifies a CE in the current VPN of the current PE, a
case-insensitive string of 1 to 20 characters that cannot include hyphens (-).
id ce-id: Specifies an ID for the CE in the VPN. The value range for the ce-id argument varies by device
model.
range ce-range: Specifies the maximum number of CEs to which the specified CE can connect. The
default is 10. The value range for the ce-range argument varies by device model.
default-offset default-offset: Specifies the initial CE ID in the VPN. It can be either 0 or 1. The default is
0.
Examples
# Create a CE for a VPN, and configure the CE name as ce1 and set the CE ID to 1.
<Sysname> system-view
[Sysname] mpls l2vpn vpn1 encapsulation ethernet
[Sysname-mpls-l2vpn-vpn1] route-distinguisher 100:1
[Sysname-mpls-l2vpn-vpn1] ce ce1 id 1
[Sysname-mpls-l2vpn-ce-vpn1-ce1]
connection
Use connection to create a Kompella connection.
Use undo connection to delete a Kompella connection on a CE interface.
Syntax
connection [ ce-offset ce-id ] interface interface-type interface-number [ tunnel-policy
tunnel-policy-name ]
undo connection { ce-offset id | interface interface-type interface-number }
Views
MPLS L2VPN CE view
Default command level
2: System level
Parameters
ce-offset ce-id: Specifies the ID of the peer CE. The value range for the ce-id argument varies by device
model.