R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

189
Table 66 Command output
Field Descri
p
tion
Peer IP address of the peer.
Local IP address of the local router.
Type BGP type.
BGP current state
Current status of the BGP session: Idle, Connect,
Active, OpenSent, OpenConfirm, and Established.
BGP current event Current event of the BGP session.
BGP last state Last status of the BGP session.
Port
Ports used by the BGP session, one is local or the other
remote.
Configured Timers locally configured.
Received Timers that the peer sends to the local device.
Negotiated Negotiated settings of the timers.
Peer optional capabilities:
Peer support bgp multi-protocol extended
Peer support bgp route refresh capability
Optional peer capabilities, including the support for
BGP multicast protocol extension and the support for
BGP route refreshing.
Address family IPv4 Unicast IPv4 unicast address family capability.
Address family L2VPN L2VPN address family.
Received
Total number of received messages and that of
received update messages.
Sent
Total number of sent messages and that of received
update messages.
Maximum allowed prefix number Maximum number of routes allowed.
Threshold
When the percentage of the number of IP prefixes
received by the device to the maximum number of
routes allowed by the device reaches this threshold
value, the device generates a prompt.
Peer Preferred Value Preferred value specified for routes from the peer.
BFD Indicates whether BFD is enabled for the peer.
Routing policy configured Routing policy specified for the peer.
# Display L2VPN information with the RD being 100:1 in the BGP routing table.
<Sysname> display bgp l2vpn route-distinguisher 100:1
BGP Local router ID : 2.2.2.9, local AS number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
bgp.l2vpn: 1 destination
CE ID Label Offset Label Base nexthop pref as-path
4 0 132096 3.3.3.9 100