R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

200
Field Descri
p
tion
LB Label block, including the label base, label-block offset, and label range.
# Display information about remote CEs of L2VPN vpn1.
<Sysname> display mpls l2vpn vpn-name vpn1 remote-ce
no. ce-id peer-id route-distinguisher LB
1 4 3.3.3.9 100:1 132096/0/10
Table 79 Command output
Field Descri
p
tion
no Sequence number.
ce-id CE ID.
peer-id IP address of the peer.
LB Label block.
display mpls l2vpn connection
Use display mpls l2vpn connection to display information about Kompella VCs.
Syntax
display mpls l2vpn connection [ interface interface-type interface-number | summary | vpn-name
vpn-name [ remote-ce ce-id | down | up | verbose ] ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
summary: Displays summary information about VC connections.
vpn-name vpn-name: Specifies an L2VPN by its name, a case-insensitive string of 1 to 31 characters that
cannot include hyphens (-).
remote-ce ce-id: Specifies the ID of the remote CE, in the range of 0 to 249.
down: Displays detailed information about VCs in down state.
up: Displays detailed information about VCs in up state. If you specify neither the down nor the up
keyword, the command displays detailed information about VCs that are either up or down.
verbose: Displays detailed information. This keyword is valid only when you display information about
all VCs in a VPN.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.